|
|
|
|  |
|
METALLIC FIBER MESH |
| Multiplayer metallic fiber mesh select metal mesh of different wire and aperture as the same order and sintered together in high temperature.
Its intension is higher than stainless steel fiber belt,its osmosis is better than metal dust ware. Characteristics :equality aperture ,high temperature-resistant, can weld ,second birth, long life etc.
It is widely used in high voltage ,high temperature medium to filtrate. |
| |
Designation
|
Type
|
Average Rating（μm） |
Size
（mm） |
Standard
|
3-layer laminate |
BWB3-5～140 |
5～140 |
≤600×1200 |
Q/FT0301-99 |
4-layer laminate |
BWB4-5～140 |
5～140 |
≤600×1200 |
Q/FT0301-99 |
5-layer laminate |
BWB5-5～140 |
5～140 |
≤450×1200 |
Q/FT0301-99 |
| Note: Tailored or special types of sintered laminates can be supplied according to the user's requirements. |
|
| |
|
| Type |
Trademark |
Rating Micron |
Standard |
Application |
| 1-layer laminate ～
700-layer laminates
|
316L |
5μm——200μm |
Q/XY2010-2002 |
High pressure media filtering;Oil bonded sand separation;Fuel,lubricate and hydraulic oil filtration;Filter media
In chemical equipment;High temperature
Gas dust-collecting;Filtering in food
Industy;Filtration in medical field |
| NOTE:Tailored of special type of sintered
laminates can be supply according to the requirement. 5-layer
laminate are general products. |
|
| |
|
 |
 |
| Cross section of the laminates |
Products of sintered laminates |
 |
|
| Products of sintered laminates |
|
| Type
|
Filtration property |
Air Permeability
L/min.dm2（≥） |
Rating Micron
(um) |
Bubble Point Pressure
(Pa)±8% |
|
5 |
200 |
2.5～7.5 |
5000 |
|
10 |
250 |
7.5～12.5 |
3700 |
|
15 |
350 |
12.5～17.5 |
2600 |
|
20 |
450 |
17.5～22.5 |
1950 |
|
30 |
550 |
27.5～35.0 |
1230 |
|
40 |
650 |
35.0～45.0 |
1020 |
|
50 |
750 |
45.0～60.0 |
860 |
|
70 |
900 |
60.0～80.0 |
690 |
|
100 |
950 |
80.0～120.0 |
630 |
|
NOTE: 1. Bubble Point Pressure Test according to ISO4003 |
|
2. Air Permeability according to ISO4022. |
|
3. Air Permeability tested under 1000(Pa),with air as medium |
|
4. For reference only,we take the certificate of inspection as the criterion |
|
5. We can provide sized products≤1000×1000mm according to client requirement |
|
|
|
|
 |
